Induction Coils
Induction Coil Specialists, Inc. specializes in the design, fabrication,
and reconditioning of induction coils. Below are pictures of induction coils
designed, built, or repaired by Induction Coil Specialists, Inc.
 |
| 2-Turn Coil for Heat Treating Gears |
 |
| Modular Design to Allow for Five-Minute Setup |
 |
| Single-Turn Coil for Heat Treating Bearing Races |
 |
 |
| 2-Turn ID Coil with Flux Concentrator |
 |
| Single-Turn ID Coil with Internal Quench and Laminations |
|
Multi-Turn ID Coils with Ceramic Coating |
 |
| ID coil with flux concentrator |
 |
| Small bore ID coil |
 |
| 2-Place Coil with Internal Quench for Heat Treating Valve Stems |
 |
| Double-Core Gear Intensifiers |
 |
| Gear Intensifier |
 |
| Helical gear intensifier |
 |
| Buss Bar |
 |
| Single-Turn Coil with Internal Quench |
 |
| Split-Return Coil with Flux Concentrator |
 |
| 5-Turn Coil With Internal Quench |
 |
| 2-Place Brazing Coil |
 |
| Single-Turn Brazing Coil |
 |
| Quench Ring |
 |
| Buss Bar Extension |
 |
| Single-Turn Coil with Attached Quench Block |
 |
| Quick Disconnect |
 |
| 2-Place Adjustable Coil with Flux Concentrators |
|
| Quench Ring |
 |
| Insert for master coil |
 |
| Tempering coil |
 |
| 2-Place coil |
 |
| Coil for heat treating contoured shafts |
